Top 10 Hammer Drill Makita UK – Hammer Drills

As an Amazon Associate I earn from qualifying purchases.

1. Makita

Makita DHR242Z 18V LXT Brushless 24mm Rotary Hammer SDS-Plus, Batteries and Charger Not Included

Makita - Easy-to-grip handle ergonomically designed to give maximum power thrust, provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.

3 mode operation: rotation + hammering, hammering only & rotation only. 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. The use of non-genuine or compatible batteries and chargers with Makita Tools will invalidate the Makita guarantee for our tools. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool. Rubber joint suppresses vibration to battery terminals, reducing failures. One touch slide chuck for SDS-plus bit.
BrandMakita
ManufacturerMakita
Height25.6 cm (10.08 Inches)
Length36.91 cm (14.53 Inches)
Weight2.7 kg (5.95 Pounds)
Width11.99 cm (4.72 Inches)
Part NumberDHR242Z
ModelDHR242Z
Warranty12 month.

2. Makita

Makita HR2630 26 mm 3 Mode SDS Plus Rotary Hammer Drill,Blue

Makita - Variable speed control. Maximum capacity in steel 13mm. 40 different bit angle settings. Maximum capacity in wood 32mm. Depth stop. Torque limiter. Forward/reverse rotation. One touch sliding chuck. Maximum capacity in concrete: tcT bit 26mm, TCT core 68mm, Diamond Core 80mm. 3 mode operation.
BrandMakita
ManufacturerMakita
Height30.8 cm (12.13 Inches)
Length42.2 cm (16.61 Inches)
Weight2.8 kg (6.17 Pounds)
Width10.6 cm (4.17 Inches)
Part NumberHR2630
ModelHR2630/2
Warranty1 year.

3. Makita

Makita HM0871C/2 240V SDS-Max AVT Demolition Hammer Supplied in A Carry Case

Makita - Double insulation. Variable speed control. Constant speed under load. Hammer only. Soft start. Anti-vibration technology.
BrandMakita
ManufacturerMakita
Height36.7 cm (14.45 Inches)
Length59 cm (23.23 Inches)
Weight5.8 kg (12.79 Pounds)
Width14.6 cm (5.75 Inches)
Part NumberHM0871C/2
ModelHM0871C

4. Makita

DHR264Z, Makita Cordless Drill Hammer for SDS Plus 2 x 18V, 18 V, 100 W, Without Battery and Charger

Makita - With sds-plus quick-release. Torque limitor stops rotation if bit jams for increased operator safety and enhanced motor protection. Without Battery and Charger. Environmentally friendly and cost efficient 2 x 18 V drive.
BrandMakita
ManufacturerMakita
Height23.2 cm (9.13 Inches)
Length11.6 cm (4.57 Inches)
Weight4.84 kg (10.67 Pounds)
Width37.4 cm (14.72 Inches)
Part NumberDHR264Z
ModelDHR264Z

5. Makita

Makita DHR241Z 18V Li-ion LXT 20mm SDS-Plus Rotary Hammer, Batteries and Charger Not Included

Makita - Conveniently located push button for forward/reverse. The use of non-genuine or compatible batteries and chargers with Makita Tools will invalidate the Makita guarantee for our tools.

Triple action mode; rotary only, hammer only and rotary hammer. Torque limiter. One touch sliding chuck. Rotation mode; the chisel can rotate a full 360 degrees with 40 different locking positions. 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. Maximum in steel 13mm, Wood 26mm and concrete 20mm. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool.
BrandMakita
ManufacturerMakita
Height20.64 cm (8.13 Inches)
Length44.45 cm (17.5 Inches)
Weight3.31 kg (7.3 Pounds)
Width9.53 cm (3.75 Inches)
Part NumberDHR241Z
ModelDHR241Z
WarrantyNo warranty.

6. Makita

2 Speed Percussion Drill Supplied in a Carry Case, Makita HP2050/2 240V 13mm, 1/2_Inch

Makita - 2 mode switch for rotation only or hammering with rotation. Keyed chuck. Forward/reverse rotation. Maximum in steel 13mm. Torque limiter. Maximum in masonry 20mm. Variable speed control. 2 mechanical gears. Anti-vibration system. Maximum in wood 40mm.
BrandMakita
ManufacturerMakita
Height33.1 cm (13.03 Inches)
Length11.1 cm (4.37 Inches)
Weight4.2 kg (9.26 Pounds)
Width42.7 cm (16.81 Inches)
Part NumberHP2050/2
ModelHP2050

7. Makita

Makita HP1641/2 240V 13mm Percussion Drill

Makita - Maximum capacity in steel 13mm. Depth gauge. In-line positive grip design maximises power thrust. Double insulation. Forward/reverse rotation. Maximum capacity in wood 30mm. Maximum capacity in masonry 16mm. Keyless chuck.
BrandMakita
ManufacturerMakita
Height26.5 cm (10.43 Inches)
Length7.7 cm (3.03 Inches)
Weight2.42 kg (5.34 Pounds)
Width28.7 cm (11.3 Inches)
Part NumberHP1641/2
ModelHP1641/2

8. Makita

Makita HM0871C/1 110V SDS-Max AVT Demolition Hammer Supplied in A Carry Case

Makita - Variable speed control. Anti-vibration technology. Constant speed under load. Double insulation. Soft start. Hammer only.
BrandMakita
ManufacturerMakita
Height38.1 cm (15 Inches)
Length16.71 cm (6.58 Inches)
Weight5.58 kg (12.3 Pounds)
Width51.99 cm (20.47 Inches)
Part NumberHM0871C
ModelHM0871C

9. Makita

Makita HR3210C/1 110V 32mm SDS-Plus AVT Rotary Hammer Supplied in a Carry Case

Makita - Maximum tcT core 90mm. Maximum capacity in concrete 32mm. 24 bit angle settings. Anti-vibration technology. Soft start, variable speed control and constant speed under load. 3 mode operation. Depth gauge. Torque limiter.
BrandMakita
ManufacturerMakita
Height44 cm (17.32 Inches)
Length60 cm (23.62 Inches)
Weight4.74 kg (10.46 Pounds)
Width17 cm (6.69 Inches)
Part NumberHR3210C/1
ModelHR3210C/1

10. Makita

Makita 8406/2 240V 13mm Diamond Core and Hammer Drill Supplied in a Carry Case 35 x 14 x 53 cm,Blue

Makita - Double insulation. Torque limiter. Maximum capacity in steel 13mm. Maximum capacity in wood 30mm. Maximum capacity in masonry 20mm. Vibration dampened rear handle. Maximum dry diamond core 152mm. Variable speed control.
BrandMakita
ManufacturerMakita
Height29.5 cm (11.61 Inches)
Length11 cm (4.33 Inches)
Weight3.6 kg (7.94 Pounds)
Width42 cm (16.54 Inches)
Part Number8406/2
Model8406/2
Warranty1 year manufacturers with a further 2 when registered.